The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO₂) insulation barrier that provides galvanic isolation of up to 5000 V_RMS for ISO1050DW and 2500 V_RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12-V to 12-V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

德克萨斯仪器iso1050dubrthe iso1050是电隔离的CAN收发器，符合标准规格的iso11898-2。该装置具有逻辑输入和输出缓冲器的一氧化硅（SiO2）分离绝缘屏障，提供了高达5000的有效值为iso1050dub iso1050dw 2500 Vrms隔离。与单独的电源一起使用，该装置防止数据总线或其它电路的噪声电流进入本地地，干扰或损坏敏感电路。

作为CAN收发器，该器件提供差动发送能力的总线和差分接收能力可以在信号速率高达每秒1兆位控制器（Mbps）。该装置被设计为运行在特别恶劣的环境中，它具有跨线、过电压和接地保护–从27 V到40 V，过热关断损耗，以及–12伏到12 V共模范围。

的iso1050的特点是工作在–55°C环境温度范围为105°C.